Whole Home Water Filtration.
Done Right.

A whole-home system filters water as it enters your property, so every tap, shower, and connected appliance gets filtered water. The RO add-on filters at one tap specifically, for drinking-water-grade purity when cooking or drinking. Most households start with the whole-home system for house-wide chlorine, sediment, and scale reduction, then add the RO unit at the kitchen tap if they also want PFAS, fluoride, and TDS reduction for their drinking water.

Neeru's whole-home system is designed and tested for standard reticulated mains water supply. Tank and bore water can vary significantly in sediment load, mineral content, and other characteristics that fall outside what the system has been tested against, so we'd recommend a water assessment first rather than assume compatibility — this is something we can help with as part of a free quote.

The 3-stage system reduces sediment, chlorine, heavy metals, and scale — Stage 1 (sediment barrier), Stage 2 (heavy metal & carbon composite), Stage 3 (scale inhibition & polishing carbon).

The whole-home system's Stage 2 (heavy metal & carbon composite, KDF-55/85 + coconut-shell carbon) reduces chlorine and heavy metals like lead and copper. Fluoride, PFAS, and TDS reduction is handled specifically by the RO add-on (Stages 4–6) — the whole-home system alone isn't rated for those.

Stage 3 of the whole-home system reduces scale buildup in pipes, hot water systems, and appliances. It's not the same as an ion-exchange water softener — there's no resin bed, salt, or regeneration cycle stripping calcium and magnesium out of the water. If you specifically want water softened rather than scale reduced, that's a different product category Neeru doesn't sell.

Some pressure loss is normal with any filtration system. Neeru's whole-home system is rated for 50–60 L/min peak flow across a 100–600 kPa operating pressure range, with an average pressure drop of around 5% — correct sizing for your property and staying on the filter replacement schedule both help maintain flow over time.

Pricing is provided as an itemised custom quote after a free, no-obligation assessment of your property, covering equipment, installation, and any fittings required. Neeru also offers $0 upfront and 0% finance over 24 months, subject to approval.

Filter cartridges are recommended for replacement every 12 months, with an 18-month maximum.

Cartridge replacement costs $330 every 18 months (at the maximum interval). The whole-home system runs on mains water pressure alone — no electricity, and no ongoing salt costs since it isn't a softener.

Replacements are arranged through Neeru's technician network, the same team that installs your system, so the recommended schedule is followed correctly and your warranty (including the Lifetime extension) stays valid.

Maintaining the Lifetime warranty extension requires using approved filter cartridges on the recommended schedule. These are sourced through Neeru as part of your ongoing service.

Licensed technicians install every system, with service and after-sales support available Australia-wide.

Every system carries a 24-month standard warranty, extendable to Lifetime coverage by using approved filter cartridges on the recommended schedule.

Neeru's fittings carry AS/NZS standards and WaterMark compliance. There's no single whole-of-system independent certification for the filtration performance itself — for specific contaminant reduction figures, refer to the product datasheet rather than a general certification claim.

The whole-home system runs entirely on mains water pressure — no electricity required. The RO add-on produces a reject-water stream to drain, which is normal for reverse osmosis systems, and also doesn't require electricity.